Skip to content
BackBoat AlmanacSign inAdd for free

Article

Marina berth guide: marinas, dry storage and moorings compared

Was it useful? Tap your stars:☆☆☆☆☆

7 min read

Published By Tuna Karslı, editorHow guides are checked

Where you keep your boat is one of the biggest running costs of ownership, and it shapes how often you actually use it. The three main choices are a marina berth, dry storage ashore and a mooring buoy, and each comes with its own balance of convenience, security and cost. The right answer depends on the size of your boat, how often you sail, where you are based and how much you want to spend.

The three main options

Marina berth

A marina berth keeps the boat afloat alongside a pontoon or finger, or moored with , inside a protected basin. Shore power, fresh water, Wi-Fi, security, fire-fighting equipment and shoreside facilities such as showers, toilets, laundry, a chandlery and restaurants are normally included or available. Many marinas around the world fly the Blue Flag, an international eco-label for environmental management and water quality.

Fees are based mainly on the boat’s length, and sometimes on length multiplied by , which matters for catamarans. In Europe rates are usually quoted per metre, in the United States commonly per foot per night or per month. Annual contracts are the norm for resident boats and work out much cheaper per day than visitor rates, while seasonal, monthly and nightly rates are available for transient boats. In some markets, long-term berths can also be bought or leased for many years.

What to look for when choosing a marina:

  • Shelter: marinas deep inside a bay or behind a substantial breakwater are safer in storms and more comfortable in swell.
  • Haul-out capacity: the or crane must be able to lift your boat, including its beam.
  • Fuel berth: on-site fuel saves an extra trip outside the marina.
  • Technical services: engineers, riggers, electricians and paint shops on site or close by.
  • Access: distance from home, the airport and main roads directly affects how often you will use the boat.
  • Depth: check depth at the entrance and on your berth at low water, especially in tidal areas.

Dry storage (boatyard)

In a boatyard the boat is kept ashore in a cradle or on adjustable stands. Many owners lift out for the winter or the storm season, and some keep their boats ashore all year and launch only when they want to use them. For small motorboats, dry-stack storage, where boats are stored on racks and launched by forklift on request, is common in the United States and increasingly elsewhere.

Benefits of dry storage:

  • Lower cost: without pontoons, breakwaters and services afloat, yard storage is usually considerably cheaper than a marina berth in the same area. Lift-out and relaunch are charged separately.
  • Access to the hull: , hull cleaning, treatment, anodes and other below-the-waterline work can be done easily.
  • Protection: the hull is out of the water, away from fouling, galvanic corrosion and wave action.

The drawback is spontaneity. You need to book a lift-out and relaunch, so a last-minute weekend afloat takes planning.

Mooring buoy

A mooring consists of a heavy sinker, such as a concrete block, an old engine block or a screw anchor, on the seabed, with a riser chain to a surface buoy. The boat is attached by a strop or pennant. Moorings are found in bays, rivers and small harbours, and in places such as the United Kingdom and New England swing moorings managed by harbour authorities, clubs or private owners are a traditional way of keeping a boat. There is no shore power, water or other services, and you need a tender to get to and from the boat.

Moorings are usually the cheapest option and are popular for small and medium-sized boats. However, they expose the boat to wind and sea in a storm, and the condition of the ground tackle is critical. Responsibility for maintaining the mooring often lies with the owner, so check who is liable before you take one on.

What to check before taking a mooring:

  • Shelter: moorings open to the prevailing wind or swell are risky; favour sheltered water with good holding.
  • Rating: the sinker and tackle must be sized for your boat’s length and .
  • Chain and shackles: worn, corroded or unseized gear is a failure risk; ask when it was last lifted and inspected.
  • Permits: many areas require a licence from the harbour authority or local council, and an unauthorised mooring can be removed or fined.
  • Waiting lists: in popular harbours, moorings can have long waiting lists.

Comparing the options

Factor Marina berth Dry storage Mooring buoy
Relative cost Highest Medium Lowest
Ease of use Step aboard and go Needs a launch booking Needs a tender
Shore power and water Yes Usually, for maintenance No
Storm exposure Low to medium Low, if properly chocked and strapped Higher
Fouling and corrosion Ongoing Minimal Ongoing
Security Staffed, often with cameras Fenced yard Limited

How prices vary around the world

Berthing costs vary enormously between regions and even between neighbouring marinas. As a broad guide:

  • Prime Mediterranean hotspots such as the French Riviera, Monaco, the Balearics and the Italian Riviera are among the most expensive places in the world to keep a boat, and summer berths for large yachts can be very hard to find.
  • Croatia and Greece have large marina networks with a wide price range; marinas near major charter bases and airports tend to be busier and more expensive.
  • Northern Europe and the United Kingdom often have a choice between marinas, tidal harbours, swing moorings and drying berths, with marinas on popular coasts commanding a premium.
  • North America ranges from expensive urban and resort marinas in Florida, California and New England to good-value yards and moorings in less crowded areas.
  • The Caribbean combines winter visitor demand with special storage arrangements for the hurricane season.

Prices are revised regularly, so always ask the marina directly for current rates and for what is included, such as electricity, water and lift-out.

How to find a berth

  1. Apply early. Many marinas renew annual contracts in the autumn, and spare berths for the following season are often taken by the start of the new year.
  2. Join waiting lists. Many marinas and mooring authorities keep a waiting list and contact applicants in order as space becomes available.
  3. Look a little further afield. A marina 15 to 20 nautical miles from the most popular one may have space at a lower price.
  4. Combine storage types. Spending the off-season ashore and the sailing season afloat, on a berth or a mooring, can cut annual costs.
  5. Move at the end of the season. Occupancy is usually lowest in early autumn, which is a good time to negotiate a new contract.
  6. Be precise about your boat. Give the marina exact length overall, beam and ; an underestimated beam or length can cost you the berth.

Winter lay-up and storm season

In the Mediterranean and much of the northern hemisphere, boats are usually laid up from around November to April. In colder regions such as northern Europe, Canada and the northern United States, winterising is essential, as freezing water can crack engine blocks, pumps and pipework, and boats are often shrink-wrapped ashore. In the Caribbean, the main concern is the hurricane season from June to November: many owners lay up ashore in yards with tie-down systems, and some move south to destinations such as Grenada or Trinidad. Insurers often set conditions for boats kept in hurricane zones during this period, so check your policy.

Leaving a boat afloat over the off-season increases fouling, galvanic corrosion and damp. Storage ashore reduces these risks and is the ideal time for annual maintenance. A typical lay-up includes:

  • lifting out and pressure-washing the hull;
  • flushing the engine with fresh water, changing oil and filters and protecting the cooling system;
  • draining the fresh-water system and adding antifreeze where frost is possible;
  • servicing and charging the batteries, or removing them;
  • removing sails and canvas, and fitting a cover that allows ventilation to prevent condensation inside.

Find berths, moorings and boatyards near you in our marina guide, and see our winterising page for lay-up services.

Share

Read next

Reader ratings

No ratings yet. Was this useful? Rate it and add what you know: corrections and first-hand tips help the next reader.

★ Rate this guide
Your rating

Stars alone are fine, and so are photos alone; a few words help even more. Reviews and bay reports go live after an automatic check that turns back adverts, contact details, insults and nonsense. The business can reply in public, but cannot edit, hide or remove a review. Sent before from this e-mail? This updates your earlier rating. Your email is never shown or shared; it keeps your reviews together in your free account. By sending you confirm it is your own first-hand experience. Privacy

Suggest a correction

One correction from you helps every sailor who opens this page after you.

An editor checks every report before anything changes on the page.

Cite this page

Marina berth guide: marinas, dry storage and moorings compared. Boat Almanac, updated 22 October 2026. https://boatalmanac.com/articles/marina-berth-guide/ (accessed 21 November 2026).

About our data

Know something other boaters should?

What you learned the hard way can spare another crew the same lesson. An editor helps polish it.

Boat Almanac is free for every sailor and grows with what sailors add.

ShareShare on WhatsApp