Skip to content
BackBoat AlmanacSign inAdd for free

Anchoring calculator

Scope, how much chain or rode to let out, and the circle your boat will swing in. The calculations run in your browser.

⚓ Anchoring calculator

How the numbers are worked out

Scope is the ratio between the length of rode you let out and the height from the seabed to your bow roller. Use the depth at high water, not the depth now: add the tide that is still to rise and the height of the bow roller above the water. With all-chain rode, 5:1 is a common minimum in settled weather and 7:1 when the wind is rising. A rope rode needs more, because it is light and pulls the anchor shank upwards; a few metres of chain between rope and anchor helps a lot.

Swing circle. Once the rode is laid out, the boat moves around the anchor as the wind and current turn. The radius is roughly the horizontal part of the rode plus the length of your boat. Boats with different rode, windage and keels swing differently, so leave more room than the arithmetic suggests, especially next to boats on rope or on a mooring.

Before you drop

Not for navigation. These tools give estimates from simple models; they support good seamanship and do not replace it. Check every result against official charts, tide tables, nautical publications, your instruments and the conditions you see. The skipper is responsible for the boat and the people on board.

More tools

24 calculators and planners

All calculators and planners

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.