Fresh water pump keeps cycling, or no water
Click, whirr, click, whirr in the night. Usually a small leak or air, not a dead pump.
How you know
- Pump runs briefly with all taps shut
- Spluttering taps
- Pump runs but no water comes out
Have ready
- Torch
- Screwdrivers
- Spare pump filter
- Plumber's tape
Step by step
- Check the tank levelAn empty tank is the commonest reason for no water. Gauges on water tanks are often wrong.
- Clean the pump filterThe small strainer before the pump blocks with debris. Close the tank valve, clean it, refit carefully.
- Look for leaksA pump that cycles with all taps off is losing pressure: a dripping tap, a fitting under a sink, the calorifier or the shower.
- Check for airAir in the system makes taps splutter. Open each tap in turn until the water runs smoothly.
- AccumulatorIf fitted, check its pressure per the instructions. A flat accumulator makes the pump cycle a lot.
Notes from the dock
- Turn the water pump off at the panel when you leave the boat. A burst fitting with the pump on empties the tank into the bilge.
- A water leak shows first as a pump that runs more often. Listen for it.
- Keep a few spare hose clips and fittings that match your system.
When to stop and call a pro
Calorifier leaks or pressure valves need care: a plumber or yard can test them properly.
More in Plumbing
- 🚽 Blocked marine toiletThe least glamorous job aboard and the most common. Patience, gloves, and no plungers of the household kind.
- 👃 Smelly heads and holding tankThe smell is usually the hoses, not the bowl. Find the source and you can fix it.
- Stiff or leaking seacockThe valve between your boat and the sea. If it will not close, it is not doing its job.
- 🫗 Fresh water in the bilgeTaste it. Fresh water in the bilge is a leak in your own system, not the sea.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.