🫗 Fresh water in the bilge
Taste it. Fresh water in the bilge is a leak in your own system, not the sea.
How you know
- Bilge water that tastes fresh
- Water tank emptying faster than you use it
- Pump running at night
Have ready
- Torch
- Screwdrivers
- Hose clips
- Plumber's tape
- Kitchen paper for tracing drips
Step by step
- Taste testFresh, salty or oily? Fresh means tanks, pipes, taps, the calorifier or the shower.
- Dry the area and traceDry the bilge, then place kitchen paper under suspect joints and see which gets wet.
- Check tank fittings and lidsInspection hatch seals and filler hoses leak when the tank is full and the boat heels.
- Check the calorifierPressure relief valves drip when the water heats. That may be normal; a steady flow is not.
- Tighten or replace clips and fittingsDo not overtighten plastic fittings: they crack.
Notes from the dock
- Turn the water pump off at the panel when away from the boat.
- Shower sump pumps fail and overflow into bilges. Check them.
- Write tank capacity on the panel: helps judge use.
When to stop and call a pro
Tank replacement or calorifier repair: a plumber or yard.
More in Plumbing
- 🚽 Blocked marine toiletThe least glamorous job aboard and the most common. Patience, gloves, and no plungers of the household kind.
- 👃 Smelly heads and holding tankThe smell is usually the hoses, not the bowl. Find the source and you can fix it.
- Fresh water pump keeps cycling, or no waterClick, whirr, click, whirr in the night. Usually a small leak or air, not a dead pump.
- Stiff or leaking seacockThe valve between your boat and the sea. If it will not close, it is not doing its job.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.