Stiff or leaking seacock
The valve between your boat and the sea. If it will not close, it is not doing its job.
How you know
- Handle will not move
- Weeping around the base
- Green or pink colouring on bronze fittings
Have ready
- Torch
- Marine grease suited to the valve
- Spanners
- Soft wooden bung (one per seacock)
Step by step
- Exercise every seacock regularlyOpen and close each one once a month. Stiff ones get worse if left.
- Never force a seized one with a long barYou can crack the valve or snap the through-hull. Ask for advice instead.
- Check for dezincificationPinkish brass under the surface is a sign of decay in unsuitable brass fittings. They can fail without warning. Replace with proper marine bronze or composite.
- Check hose clipsTwo stainless clips on each hose below the waterline is a common good-practice rule.
- Tie a bung to each oneA soft wooden bung on a string next to each seacock is the cheapest insurance on the boat.
Notes from the dock
- Most sinkings at the berth start below the waterline: a hose, a clip, a seacock.
- When you buy a boat, have every below-waterline fitting checked.
- Label each seacock with what it serves. In the dark, you will be glad.
When to stop and call a pro
Replacing through-hulls and seacocks is a haul-out job. Most surveyors check them on every survey.
More in Plumbing
- 🚽 Blocked marine toiletThe least glamorous job aboard and the most common. Patience, gloves, and no plungers of the household kind.
- 👃 Smelly heads and holding tankThe smell is usually the hoses, not the bowl. Find the source and you can fix it.
- Fresh water pump keeps cycling, or no waterClick, whirr, click, whirr in the night. Usually a small leak or air, not a dead pump.
- 🫗 Fresh water in the bilgeTaste it. Fresh water in the bilge is a leak in your own system, not the sea.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.