🚽 Blocked marine toilet
The least glamorous job aboard and the most common. Patience, gloves, and no plungers of the household kind.
How you know
- Pump handle hard to move or does nothing
- Bowl fills but will not empty
- Water creeps back into the bowl
Have ready
- Gloves and eye protection
- Bucket and rags
- Screwdrivers
- Spare joker valve and pump seals
- Hot water and a lot of patience
Step by step
- Find what kind of blockageHard handle: blockage in the pump or outlet. Easy handle but no flow: a valve (often the joker valve) is stuck or the seacock is shut.
- Check the seacocksInlet and outlet open? It sounds silly until it is the answer.
- Clear the joker valveThe rubber flap valve at the outlet often blocks with scale or paper. Close the seacocks, take it out, clean or replace it.
- Deal with scaleHard white scale builds up in outlet hoses, narrowing them. Some owners use a dilute acid treatment per the toilet maker's instructions; badly scaled hoses are best replaced.
- Prevent itNothing goes in the bowl that you have not eaten first, except a little toilet paper. Tell every guest, kindly and clearly.
Notes from the dock
- Keep a laminated card by the loo explaining how to use it. Guests will read it.
- Replace the joker valve every season or two; they cost little and stop most smells and backflow.
- Pump plenty of water after each use so nothing sits in the hose.
When to stop and call a pro
Replacing scaled hoses is unpleasant but simple. Holding tank and through-hull work may need a yard.
More in Plumbing
- 👃 Smelly heads and holding tankThe smell is usually the hoses, not the bowl. Find the source and you can fix it.
- Fresh water pump keeps cycling, or no waterClick, whirr, click, whirr in the night. Usually a small leak or air, not a dead pump.
- Stiff or leaking seacockThe valve between your boat and the sea. If it will not close, it is not doing its job.
- 🫗 Fresh water in the bilgeTaste it. Fresh water in the bilge is a leak in your own system, not the sea.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.