🟤 Rust stains on stainless steel
Brown tea staining on 'stainless'. Mostly cosmetic, sometimes a warning. Learn which.
How you know
- Brown staining on rails and fittings
- Rust weeping from welds or cracks
- Pitting
Have ready
- Stainless cleaner or a mild acid cleaner made for it
- Non-scratch pads
- Fresh water
- Polish or protectant
Step by step
- Clean with the right productUse cleaners made for stainless. Avoid steel wool: it leaves particles that rust.
- Rinse wellLeftover cleaner can damage gelcoat. Rinse plenty.
- ProtectA stainless polish or protectant slows the return of staining.
- Look for real troubleRust coming out of a crack, a weld or a rigging terminal is a structural warning, not a stain.
- Rinse with fresh water oftenSalt drying on stainless starts the staining.
Notes from the dock
- Tea staining is common in hot, salty, wet places.
- Cracks at welds on pulpits and stanchion bases are worth a close look.
- Never ignore rust weeping from rigging terminals.
When to stop and call a pro
Weeping cracks in rigging or structural fittings: a rigger or fabricator.
More in Hull and deck
- 🪨 Replacing sacrificial anodesThey are meant to dissolve so your prop and shaft do not. When they are half gone, change them.
- ✨ Small gelcoat chips and scratchesA dock bump or a dropped winch handle. Small repairs are very doable; matching colour is the art.
- Rebedding a leaking deck fittingThat drip over the chart table comes from somewhere. Usually a stanchion, a cleat or a window.
- 🫧 Blisters on the hull: what to checkSeeing blisters at haul-out is alarming. Many are cosmetic, some are not. Here is how to tell.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.