Skip to content
Boat AlmanacSign inAdd for free

Patching a leaking inflatable dinghy

Soft every morning? Find the hole with soapy water; fix it with the right glue for the fabric.

🛶 Patching a leaking inflatable dinghy

How you know

  • Tubes softer each morning
  • Hissing sound
  • Bubbles at a seam or valve

Have ready

  • Repair kit matched to the fabric (PVC or Hypalon)
  • Soapy water spray
  • Sandpaper
  • Solvent the glue maker names
  • Marker pen
  • Something round to press with

Step by step

  1. Know your fabricPVC and Hypalon need different glues. The wrong one never holds. Check the maker's label or ask.
  2. Find every leakPump hard, spray soapy water, watch for growing bubbles. Check valves and seams too. Mark each one.
  3. Prepare the surfaceDeflate. Sand the area lightly, clean with the right solvent. Dry and warm is best.
  4. Glue as the kit saysMost need two thin coats on both surfaces, a wait until tacky, then press firmly from the middle outwards.
  5. Let it cureUsually a day before inflating fully. Patience here is the whole repair.

Notes from the dock

  • Many slow leaks are the valve, not the fabric. A valve tool and a new valve core are cheap.
  • Cut patches round and generously bigger than the hole.
  • Heat and humidity make glue misbehave. Work in the shade, in dry weather.

When to stop and call a pro

Seam failures, large tears and tired Hypalon need a liferaft or dinghy repair shop.

Find a professional near you

More in Systems and safety

General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.