Skip to content
Boat AlmanacSign inAdd for free

⛓️ Anchor and chain care

The gear that holds you at night. Look at it once a season and mark the chain so you know what is out.

⛓️ Anchor and chain care

How you know

  • Rust on links
  • Bent shank or worn swivel
  • You never know how much chain is out

Have ready

  • Paint or cable ties in colours for marking
  • Wire brush
  • Spare shackle and mousing wire
  • Hose

Step by step

  1. Lay out the chainOn the pontoon or the hard, look at every few metres. Thin, rusty links and lost galvanising near the anchor end are common.
  2. Check the connection to the anchorShackle pin moused with wire or cable ties. Swivels are a weak point: inspect closely.
  3. End-for-end the chainTurning the chain round puts the less-worn end at the anchor and makes it last longer.
  4. Mark the lengthColour marks every 10 metres. Write the code on a card at the helm.
  5. Secure the bitter endTie the inboard end with a line that can be cut in an emergency, not shackled.

Notes from the dock

  • A simple rule of thumb many use is at least four to five times the depth in chain, more in wind. Know your gear and the seabed.
  • Rinse the chain locker now and then: rotten mud smells and rusts the chain.
  • Re-galvanising old chain is possible and often cheaper than new.

When to stop and call a pro

If you are unsure your anchor suits your boat, ask an experienced rigger or chandler.

Find a professional near you

More in Systems and safety

General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.