Skip to content
Boat AlmanacSign inAdd for free

Checking a gas (LPG) system for leaks

Gas sinks and gathers in the bilge. A simple test can keep everyone safe.

🔥 Checking a gas (LPG) system for leaks

How you know

  • Smell of gas
  • Gas alarm sounding
  • Cylinder empties faster than it should

Have ready

  • Leak-detection spray or soapy water and a brush
  • Torch
  • Gas alarm if fitted

Step by step

  1. If you smell gas, act firstTurn off the cylinder valve. No flames, no switches, no smoking. Open hatches, ventilate, and get people off the boat if the smell is strong.
  2. Use a leak testIf your system has a bubble tester or pressure gauge, use it as the maker says.
  3. Soapy water on every jointBrush soapy water on joints, hoses and the regulator. Growing bubbles show a leak. Never use a flame.
  4. Check the hosesFlexible hoses crack and have a date on them. Replace them by the date.
  5. Turn off at the bottleClose the cylinder valve when not cooking. Every time.

Notes from the dock

  • Gas lockers must drain overboard. A blocked drain turns the locker into a tank of gas.
  • Many marinas and countries require periodic gas safety checks by a qualified fitter. Check yours.
  • Fit a gas alarm with its sensor low down, near the bilge.

When to stop and call a pro

Any repair to the gas system itself should be done by a qualified gas fitter.

Find a professional near you

More in Systems and safety

General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.