Skip to content
Boat AlmanacSign inAdd for free

Anchor windlass not working

The anchor is down and the button does nothing. Usually power, rarely the motor.

⚓ Anchor windlass not working

How you know

  • Click but no turn
  • Works up but not down, or the reverse
  • Very slow or stalls under load

Have ready

  • Multimeter
  • Spanners
  • Wire brush
  • The manual windlass handle
  • Spare fuse or breaker reset

Step by step

  1. Get the anchor up by hand first if you mustUse the manual handle or the boat's engine to motor gently up to the chain while someone hauls. Safety before diagnosis.
  2. Check the breaker and isolatorWindlass breakers trip under heavy load. Reset once. If it trips again, find out why.
  3. Listen for the solenoidA click means the switch and solenoid work but power is not reaching the motor, or the motor is stuck.
  4. Check the deck switch and remoteFoot switches fill with salt water and corrode. Test with the remote, or bridge the switch with care.
  5. Check the big cablesMeasure voltage at the motor while someone presses the button. A big drop means a bad connection or undersized cable.

Notes from the dock

  • Run the engine while using the windlass: the extra voltage makes it stronger and spares the battery.
  • Never use the windlass to pull the boat to the anchor in a breeze. Motor up to it.
  • Rinse the deck switch with fresh water now and then.

When to stop and call a pro

A burnt motor or stripped gearbox needs parts from the maker; a marine electrician can test the motor.

Find a professional near you

More in Systems and safety

General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.