🌫️ Condensation and mould below
Wet cushions, black spots, that smell. Air moves the water out; nothing else really does.
How you know
- Water dripping from hatches and hull in the morning
- Black spots on headlining and cushions
- Musty smell when you open the boat
Have ready
- Mould cleaner suited to the surface
- Microfibre cloths
- Dehumidifier (when on shore power)
- Moisture absorbers
- Small fans
Step by step
- Clean what you haveWipe mould off with a suitable cleaner. Wash cushion covers. Dry everything in the sun if you can.
- Get air movingOpen lockers and lift cushions when you leave. Vents, open hatches on rain covers, small fans.
- Remove water at the sourceWet clothes, cooking and people breathing make water. Ventilate while cooking, dry gear in the cockpit.
- Use a dehumidifier on shore powerFar better than heaters, which only move the water around.
- Insulate cold spotsCold hull areas behind cushions sweat. A breathable mat behind mattresses helps a lot.
Notes from the dock
- A boat closed up in a hot place for a month can grow a forest. Leave lockers open.
- Bleach on fabrics and headlinings can damage them; use what the maker recommends.
- Leaks feed mould too. Find them (see the deck leak guide).
When to stop and call a pro
Rot in wooden bulkheads or wet core behind mould needs a shipwright.
More in Systems and safety
- Checking a gas (LPG) system for leaksGas sinks and gathers in the bilge. A simple test can keep everyone safe.
- Anchor windlass not workingThe anchor is down and the button does nothing. Usually power, rarely the motor.
- Patching a leaking inflatable dinghySoft every morning? Find the hole with soapy water; fix it with the right glue for the fabric.
- ⛓️ Anchor and chain careThe gear that holds you at night. Look at it once a season and mark the chain so you know what is out.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.