Skip to content
Boat AlmanacSign inAdd for free

🪡 Small sail repairs at sea or at anchor

A tear caught early is a patch. Left to flog, it becomes a new sail.

🪡 Small sail repairs at sea or at anchor

How you know

  • Small tear or hole
  • Chafe where the sail touches the spreaders
  • Stitching undone on a seam

Have ready

  • Sail repair tape
  • Sailmaker's needles and waxed thread
  • Palm
  • Scissors
  • Small knife

Step by step

  1. Take the sail down or reduce loadSmall tears grow quickly once the sail flogs.
  2. Clean and dry the areaTape sticks only to clean, dry cloth. Wipe off salt with fresh water if you can, then dry.
  3. Round the corners of the patchSquare corners peel. Cut rounded patches a good margin larger than the tear.
  4. Tape both sidesPress firmly, rubbing out any bubbles.
  5. Stitch if it carries loadFor tears near the leech or corners, add hand stitching around the edge of the tape.

Notes from the dock

  • Most tears start at chafe points: spreader ends, lifelines, the pulpit. Add patches there before they wear through.
  • Keep a small repair kit in a waterproof bag, separate from the toolbox.
  • Note every repair and show the sailmaker at the end of the season.

When to stop and call a pro

Repairs in load areas, UV covers and seams need a sailmaker's machine.

Find a professional near you

More in Rigging and sails

General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.