Servicing a winch
Strip, clean, grease, reassemble. Lay out the parts in order and it is oddly satisfying.
How you know
- Clicking stops or becomes uneven
- Winch slips under load
- Stiff or gritty turning
Have ready
- Service manual or exploded drawing for your winch
- Container for parts
- Rags and degreaser
- Winch grease and light oil for pawls
- Spare pawls and springs
- A towel under the work area
Step by step
- Put a towel around the baseSmall springs leap overboard with great enthusiasm.
- Take it apart in orderPhotograph each step. Lay the parts out in a line so they go back the same way.
- Clean everythingOld grease and salt out. Check the gear teeth and bearings for wear.
- Grease lightlyThin coat of winch grease on gears and bearings. Pawls and springs get a little light oil only; grease makes them stick.
- Reassemble and testTurn by hand: it should spin freely and the pawls should click crisply both ways it is meant to.
Notes from the dock
- Replace pawl springs every service. They cost very little and cause most slipping winches.
- Too much grease is a common mistake. It collects grit.
- Do one winch at a time so you always have a complete one to copy.
When to stop and call a pro
Badly worn gears or a cracked drum need parts from the maker or a rigging shop.
More in Rigging and sails
- Rig check before the seasonAn hour with a torch and a magnifying glass, from deck level. Look for the small things that become big ones.
- 🪡 Small sail repairs at sea or at anchorA tear caught early is a patch. Left to flog, it becomes a new sail.
- Jammed roller furlerThe genoa will not roll in, or will not come out. Don't fight it with a winch.
- 🧶 Stopping chafe on mooring lines and sheetsRopes rarely break; they wear through. Chafe is the slow way to lose a boat.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.