Jammed roller furler
The genoa will not roll in, or will not come out. Don't fight it with a winch.
How you know
- Line will not pull
- Sail rolls part way then stops
- Furling line wrapped on the drum
Have ready
- Winch handle (used gently)
- Binoculars
- Knife
- Spare line
Step by step
- Stop pulling hardWinching a jammed furler can break the drum, the foil or the halyard swivel.
- Look at the drumLine overriding itself on the drum is common. Ease the sheet, unwind a few turns, and lead it fairly.
- Look upA halyard wrapped around the forestay above the swivel (halyard wrap) is a classic jam. Binoculars help.
- Furl by hand if neededHead off downwind to blanket the sail behind the main, and roll the sail around the foil by walking it round.
- Drop it if you mustIf nothing works and the weather is building, lower the sail completely and lash it on deck.
Notes from the dock
- Keep a couple of turns of sail on the furler with the line led fairly. Most jams are bad leads.
- Halyard wraps are prevented by the right halyard angle at the top. A rigger can fit a restrainer.
- Practise furling in light air so you know how it should feel.
When to stop and call a pro
Damaged swivels, bent foils or bearings: a rigger.
More in Rigging and sails
- Rig check before the seasonAn hour with a torch and a magnifying glass, from deck level. Look for the small things that become big ones.
- Servicing a winchStrip, clean, grease, reassemble. Lay out the parts in order and it is oddly satisfying.
- 🪡 Small sail repairs at sea or at anchorA tear caught early is a patch. Left to flog, it becomes a new sail.
- 🧶 Stopping chafe on mooring lines and sheetsRopes rarely break; they wear through. Chafe is the slow way to lose a boat.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.