Rig check before the season
An hour with a torch and a magnifying glass, from deck level. Look for the small things that become big ones.
How you know
- New season, new owner, or after a knockdown
- Rust staining on terminals
- Loose or slack rigging
Have ready
- Torch
- Magnifying glass
- Camera
- Split pins and tape
- Notebook
Step by step
- Look at every terminalSwages and end fittings: hairline cracks, rust weeping out, bent fittings. Photograph each.
- Check the wiresBroken strands near terminals are a warning to replace. Run a rag along the wire: it snags on broken strands.
- Split pins and rigging screwsEvery pin there, ends taped so they do not tear sails and fingers. Rigging screws not cracked, threads not stripped.
- Chainplates and the deck around themLeaks and stains around chainplates can hide corrosion beneath.
- Go aloft or get someone toMasthead fittings, sheaves, lights. Use a proper climbing harness and a backup halyard.
Notes from the dock
- Most rig failures start at a small part: a pin, a toggle, a crack nobody looked at.
- Ask the rigger how old your standing rigging really is. Many insurers ask too.
- Note the turns on each rigging screw before you adjust anything, so you can go back.
When to stop and call a pro
Tuning the rig, replacing wire and anything you are unsure of aloft: a rigger.
More in Rigging and sails
- Servicing a winchStrip, clean, grease, reassemble. Lay out the parts in order and it is oddly satisfying.
- 🪡 Small sail repairs at sea or at anchorA tear caught early is a patch. Left to flog, it becomes a new sail.
- Jammed roller furlerThe genoa will not roll in, or will not come out. Don't fight it with a winch.
- 🧶 Stopping chafe on mooring lines and sheetsRopes rarely break; they wear through. Chafe is the slow way to lose a boat.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.