🧶 Stopping chafe on mooring lines and sheets
Ropes rarely break; they wear through. Chafe is the slow way to lose a boat.
How you know
- Fuzzy, flattened spots on lines
- Lines rubbing on fairleads, rails or the bow roller
- Creaking at the cleat in a blow
Have ready
- Chafe guards or old hose
- Sail tape
- Spare lines
- Knife
Step by step
- Look where lines touchFairleads, toerails, bow rollers, the edge of the quay.
- Fit chafe guardsLeather, purpose-made sleeves or split hose at each rub point. Tie them so they cannot slide.
- Double up in a blowA second line takes over if one fails. Spring lines spread the load.
- Move the wear pointEase or shorten lines a little every day in long stays so the same spot does not wear.
- Snubbers on anchor chainA bridle or snubber takes the load off the windlass and quiets the chain.
Notes from the dock
- Most boats lost in storms at the dock lost a line to chafe first.
- Mooring compensators reduce snatch loads.
- Check lines before you leave the boat for a week, not after.
When to stop and call a pro
Storm preparation for a long absence: many marinas offer a check service.
More in Rigging and sails
- Rig check before the seasonAn hour with a torch and a magnifying glass, from deck level. Look for the small things that become big ones.
- Servicing a winchStrip, clean, grease, reassemble. Lay out the parts in order and it is oddly satisfying.
- 🪡 Small sail repairs at sea or at anchorA tear caught early is a patch. Left to flog, it becomes a new sail.
- Jammed roller furlerThe genoa will not roll in, or will not come out. Don't fight it with a winch.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.