🪵 Cleaning teak without ruining it
Teak dies from too much love more often than too little. Gentle is the whole secret.
How you know
- Grey, dirty or green-tinged teak
- Raised grain, with the soft wood worn away
- Black seams lifting
Have ready
- Soft brush or pad
- Bucket, mild soap or a teak cleaner
- Hose with plenty of fresh water
- Gloves
Step by step
- Wet the deck firstClean water first, always. Dry scrubbing grinds dirt in.
- Scrub across the grain, gentlyWith a soft brush or pad and mild cleaner. Scrubbing along the grain with a hard brush digs out the soft wood and ages the deck years in an afternoon.
- Rinse very wellLeftover cleaner keeps working. Rinse until the water runs clear.
- Never pressure-wash teakIt strips the soft grain and loosens seams. It is fast and it is the end of the deck.
- Decide on finishMany owners leave teak to weather silver. Oils look good briefly but need constant work and can trap dirt.
Notes from the dock
- Two-part teak cleaners are powerful. Use them rarely and follow the instructions to the letter.
- A sea-water rinse in the morning keeps teak from drying out and cracking in hot climates.
- Lifting seams let water under the deck. Fix them early.
When to stop and call a pro
Re-caulking seams or replacing worn deck planks is skilled work best left to a shipwright.
More in Hull and deck
- 🪨 Replacing sacrificial anodesThey are meant to dissolve so your prop and shaft do not. When they are half gone, change them.
- ✨ Small gelcoat chips and scratchesA dock bump or a dropped winch handle. Small repairs are very doable; matching colour is the art.
- Rebedding a leaking deck fittingThat drip over the chart table comes from somewhere. Usually a stanchion, a cleat or a window.
- 🫧 Blisters on the hull: what to checkSeeing blisters at haul-out is alarming. Many are cosmetic, some are not. Here is how to tell.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.