Skip to content
Boat AlmanacSign inAdd for free

🚥 Navigation lights not working

You find out at dusk, usually. Fuse, bulb, connection: in that order.

🚥 Navigation lights not working

How you know

  • One or all lights dark
  • Lights flicker in a sea
  • Works at the dock, fails underway

Have ready

  • Multimeter
  • Spare bulbs or LED units
  • Spare fuses
  • Small screwdrivers
  • Contact cleaner

Step by step

  1. Check the switch panel and fuseA blown fuse kills several lights at once. Replace it with the same rating. If it blows again, there is a short to find.
  2. Check the bulb or LEDCorroded bulb holders cause as many failures as bulbs. Clean the contacts until shiny.
  3. Measure voltage at the lightWith the switch on, you should see close to battery voltage at the fitting. If not, the fault is in the wiring.
  4. Masthead lightsProblems are often at the mast foot plug or deck gland, where water gets in. Look there before going up the mast.
  5. Fix properly, seal wellUse proper connectors and seal deck glands. A temporary fix lasts exactly one wet night.

Notes from the dock

  • Carry a set of battery-powered emergency navigation lights. They have saved many deliveries.
  • LED replacements must be rated for navigation lights; ordinary LED bulbs may not meet the visibility rules.
  • Check all lights before every night passage, not when you leave the marina.

When to stop and call a pro

Mast wiring and deck plugs are easier with the mast down. Leave the big jobs for the yard at haul-out.

Find a professional near you

More in Electrics

General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.

Know these waters?

Free and quick. What you add helps the next crew decide.

Boat Almanac is free for every sailor and grows with what sailors add.