Shore power keeps tripping
Plug in, click, dark. Could be the boat, the lead or the pontoon. Find which with care.
How you know
- Pontoon breaker trips when you plug in
- Trips when the water heater or charger starts
- Trips only in rain
Have ready
- Plug-in mains tester (polarity)
- Torch
- Spare lead if you have one
Step by step
- Safety firstMains on a boat near water can kill. Switch off at the pontoon before unplugging or plugging.
- Try another socketIf it works elsewhere, the pontoon socket may be faulty. Tell the marina.
- Switch off big loadsWater heater, charger, air conditioning. Turn them on one at a time to find the one that trips it.
- Check the lead and plugsWet, burnt or corroded plugs cause earth leakage trips. Dry, clean, or replace.
- Look for dampTrips only in rain often mean water in a socket or fitting.
Notes from the dock
- Do not tape over or bypass a tripping breaker. It is doing its job.
- A galvanic isolator protects underwater metals but needs to be the right one.
- Coil the lead so the plug ends stay dry.
When to stop and call a pro
Anything inside the AC system needs a qualified marine electrician.
More in Electrics
- Batteries flat after a few days: finding the drainSomething is quietly drinking your batteries. A multimeter and some patience will find it.
- Batteries not charging from the engine or chargerThe engine runs, the voltage does not rise. Three measurements tell you where the fault is.
- Corroded terminals and green connectionsSalt air turns copper green and good connections into heaters. Clean, seal, repeat.
- 🚥 Navigation lights not workingYou find out at dusk, usually. Fuse, bulb, connection: in that order.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.