🛞 Steering stiff, loose or noisy
A wheel that fights you or has slack is telling you something. Check before it parts.
How you know
- Stiff wheel
- Play before the rudder moves
- Knocking or creaking from the stern
Have ready
- Torch
- Spanners
- Grease and light oil
- Emergency tiller (find it now)
Step by step
- Find the emergency tillerBefore anything else. Know how to fit it, in the dark.
- Inspect the cablesLook for broken strands, wear where they pass sheaves, and correct tension. Slack cables jump off sheaves.
- Check sheaves and quadrantSheaves should turn freely and be firmly fixed. Quadrant bolts tight.
- Check the rudder bearingsStiffness can be the bearings. Play can be worn bearings or a loose quadrant.
- Lubricate as the maker saysSome systems want grease, some want nothing on them at all.
Notes from the dock
- Most cable steering failures start with a frayed cable nobody looked at.
- Carry spare cable and clamps for a long passage.
- Hydraulic steering: check the fluid level and look for drips at the rams.
When to stop and call a pro
Rudder bearing replacement and hydraulic repairs: a yard.
More in Engine and drive
- Outboard won't startPull, pull, nothing. The usual six suspects, in the order they actually bite.
- Diesel cranks but won't startIt turns over happily and refuses to fire. Almost always fuel or air, rarely anything dramatic.
- Engine overheating, or no water from the exhaustThe alarm screams, the gauge climbs. Stop the engine first, then work from the seacock in.
- Changing the raw-water pump impellerCheap part, big consequences. Ten minutes on a good engine, an hour on one built by a contortionist.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.