Exhaust smoke: what black, white and blue mean
The colour of the smoke is the engine telling you what is wrong. It is worth learning the language.
How you know
- Smoke that is new or getting worse
- Smoke with a change in sound or power
Have ready
- Your eyes and nose
- A notebook
Step by step
- Black smokeToo much fuel for the air. Common causes: overloaded engine (fouled hull or prop, wrong prop), blocked air filter, worn injectors. Try a lighter load first: clean the prop and hull.
- White smoke that clears when warmNormal on a cold morning: unburnt fuel and condensation. Nothing to fear if it goes once the engine warms.
- White smoke that stays, sweet smellCoolant may be burning: a head gasket or a cracked part. Check the coolant level when cold. Stop using the engine hard and get it checked.
- Steam with little water at the exhaustCooling water flow is low. See the overheating guide straight away.
- Blue or grey smokeOil is burning: worn rings or valve stem seals, or too much oil in the sump. Check the level first.
Notes from the dock
- A fouled prop makes black smoke and slow speed. Divers clean props for far less than you will spend on fuel and worry.
- Photograph the exhaust once a season when all is well. You will have something to compare with.
- An engine that 'always smoked a bit' was usually telling someone something.
When to stop and call a pro
White smoke that stays, blue smoke, or any smoke with knocking or loss of power needs a mechanic and possibly a compression test.
More in Engine and drive
- Outboard won't startPull, pull, nothing. The usual six suspects, in the order they actually bite.
- Diesel cranks but won't startIt turns over happily and refuses to fire. Almost always fuel or air, rarely anything dramatic.
- Engine overheating, or no water from the exhaustThe alarm screams, the gauge climbs. Stop the engine first, then work from the seacock in.
- Changing the raw-water pump impellerCheap part, big consequences. Ten minutes on a good engine, an hour on one built by a contortionist.
General guidance from experience, not instructions for your boat. Follow the maker's manual, work safely, and ask a qualified professional for anything you are not sure of.